Cartridge instruction

I told you about "before up grading your cartridge"  I want you to try our product.
Hey! Good  Cartridge will cost you enough make your wife bite you. But our product is around $20 with free shipping.

BUT  YOU DON'T KNOW HOW???

Instructions:

1. Install stylus protection cover over your stylus, If the stylus can be removed better still.

The Alien Tweak Audio resonance control kit is simply inserted between the head shell and cartridge.

If you resonance control kit came with screws please use the brass screws. They should be a little longer to accommodate the thickness of the resonance control pad.

We are installing our pad into a SME 3009 head shell. Using supplied brass screws and a vintage Sonus Gold cartridge. You will need tweezers to pull the wires off your cartridge or install them, and a small screwdriver.

Please note: We have removed the shell connect wires for easier viewing, You don’t have to remove your wires.

After removing your cartridge . Install the pad into the head shell as follows

Install the pad into the headshell (illustation1)

Install one screw with the nut attached. (see Illustration 2)

Install your cartridge back into the headshell (illustration 3)

Install the screw and nut to hold the cartridge and pad in place.
Note when tightening the screws do not over tighten the screws. Doing so, will make your cartridge sound dull and lifeless. A little more the finger tight works best. If you can move the cartridge with a little more than a slight push, That’s about perfect.

It’s almost ready to go!

Re-install your wires to the cartridge.

Install your head shell to the tonearm.

Rebalance the tone arm to zero. The arm with cartridge installed should float in mid air. Zero weight. Now simply adjust for the weight of your cartridge set the weight to your cartridge factory specs. If it’s one gram than you set it at one gram. Do not compensate for the pad.

Demagnetize your cartridge. (See illustration) This is a nice tweak and it’s free.

NOTE: Every cartridge and tonearm may have a different way to install your cartridge or your headshell may not be removable. Please refer to the factory manual for installation instuctions. You are now ready to enjoy your purchase.

Welcome to Alien Tweak Audio Family, We welcome your questions or comments.

Best regards

Alien Tweak Audio

Virtually from another world.